Appleton EFKF12Q Explosionproof Switch Cover, 1-Pole, 20A

Appleton EFKF12Q Explosionproof Switch Cover

Not sure which switch cover fits your hazardous location setup? The EFKF12Q is a cover made by Appleton for switches installed in areas where flammable gases, vapors, or dust may be present, like chemical plants and refineries. It is explosionproof and dust-ignitionproof, meaning it contains any internal arcing so it cannot ignite the surrounding atmosphere.

This cover is made for a 1-pole, non-sealed EFS tumbler switch rated 20 A at 120 to 277 VAC, and it is built to fit EFD type single-gang outlet boxes. It is made of malleable iron for long-term durability, and it comes with all the mounting hardware you need, including device mounting screws, an internal ground screw, and stainless steel cap screws. The cover is listed to UL 894/1203 and carries a NEMA 7CD, 9EFG enclosure rating for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups E, F, and G; and Class III locations.

Common Applications

• Chemical and petrochemical plants
• Oil and gas refineries
• Areas with combustible dust
• Switching lighting and light power loads in hazardous areas

Key Features

• Explosionproof and dust-ignitionproof: Contains arcing so it will not ignite gases, vapors, or dust nearby.
• Durable malleable iron body: Holds up in tough industrial settings.
• Tight-sealing design: Smoothly ground surfaces keep the cover flame-tight against the box.
• All hardware included: Comes with the screws you need to mount it.
• Locks ON or OFF: The handle can be padlocked for added safety.

Specifications

• Catalog Number: EFKF12Q
• Manufacturer: Appleton
• Product Type: Explosionproof switch front cover (cover only)
• Poles: 1
• Gangs: 1
• Amperage: 20 A
• Voltage: 120-277 VAC
• Material: Malleable iron
• Enclosure Rating: NEMA 7CD, 9EFG
• Hazardous Location Rating: Class I, Division 1 and 2, Groups C, D; Class II, Division 1 and 2, Groups E, F, G; Class III
• Standard: UL 894/1203
• For Use With: EFD type single-gang outlet boxes

Product Identification

• Country of Origin: USA
• UPC: 781381277303

FAQ

What does the EFKF12Q do?
It is a protective cover for a switch installed in a hazardous area, keeping any internal arcing from reaching flammable gases, vapors, or dust nearby.

Does it include the switch itself?
No, this is the cover only. The switch and outlet box are ordered separately.

What locations is it approved for?
It is listed to UL 894/1203 for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups E, F, and G; and Class III locations.

What power rating does it handle?
20 A at 120 to 277 VAC, for a 1-pole switch.

Can I lock the switch on or off?
Yes, the handle can be padlocked in either position for added safety.

Where is it made?
It is made in the USA by Appleton.